Видео

Can this kind of work be done in OpenSCAD?

Fantastic! I was just thinking about developing a workbench that would enable the generation of structural wood elements from walls, slabs and roofs on Arch/BIM. Similar to how the "Reinforcement" workbench adds rebar to elements. In this case, it would involve setting the studs, spacing, joints, and so on. It's going to be a long journey, and I'm still learning how to bring this idea to life. Greetings!

In FreeCad If you fillet all corners first, both inside and outside (assuming you want the same radius on the) you only have to make one more fillet for the whole outside of the box as you only have to select one of each length of the outside say the 2 top edges and one of each of the bottom edges one inside one outside. And with that second fillet you're done as the fillet will travel along as the corners are allready rounded. And it makes a much prettier corner fillet as well.

doesn't the metal band (lateral) go around the outside of the vertical supports? Otherwise they aren't working together and can move independently, if the band is on the outside they lock together and "contain" one another (and the concrete) much better.

How do you free rotate the view?

Clearest tutorial I've seen about FreeCad. I taught ACAD but now that I'm retired I have to pay A LOT for it. FreeCad is not at all intuitive, so, thanks. Do you have other tutorials?

Awesome video. I tried watching another video and he was going so fast I couldn't keep up. Even with pausing ti was a pain. Could you do a very quick video on how to convert this to the files necessary to send to JLPCB. Another problem I had was I have kicad 8 so a few things were in different locations. I had to hunt for the text tool.

Thank you so much for going over the basics. After this video I was able to go off and create pretty much anything that came to mind. I just needed to learn how to begin and this was perfect for that.

How to install on windows. I unzip it and one gets a folder. Inside the folder is a bin folder. I click on freecad.exe and it takes ages to open and then does not run properly.

I LOVED IT TOO MUCH this is the only tutorial that I wished was longer

great job！this example help me understand the routine of simulation using FreeCAD. Thank you very much.

challenge, redesign this so that only three pins are required without using any additional components, just a simple rewiring change (pro tip: I can do this, so it is possible!)

Excellent

5 minutes of bla bla bla bla bla bla bla and 30 seconds of content!

3:10 "When you click done, nothing seems to happen until you click OK." Tada ! Frustration disappears. Thank you !

THANK YOU SO MUCH!!!! this tool was making me pull my hair OUT!!!and thanks to the failure states and the ambiguity of the terms and their relation to what we are trying to do experimenting with is was NOT very efficient

Thank you! Managed to print a replacement for my bike saddle bag using this as a guide. Salutations!

Nicely presented and extremely useful.

Jesteś Wielki :) Pomogłeś Mi

So around 1:23, where he's telling us to go to Patreon instead of telling us what he's actually _doing_, it's like this: Click New (top left icon) to get a blank document. Then click the white 2x2 grid icon, which is Toggle Grid (toggle Draft grid). Now you get some axes, no grid. Then (and this is the missing info -- RUclips says this section is "most replayed", go figure) he's scrolling his mouse wheel like crazy and zooming out, from paperclip scale to house scale. If you look at the bottom right corner of the window, there are dimensions. The grid lines are 12 in apart (because you set them by following the "settings used" link... right?) so if you're zoomed in to 3/8 in you'll never see those lines. You need it to show _feet_, and really _tens of feet_, before you'll get a nice grid to look at. (Instead of the mouse wheel you can also do Ctrl-minus and plus to zoom. Macs use Cmd.)

He sir how I can edit the led is color to make it green red and yellow like this one in the example that had shown I tried several times and can’t edit the color of it this make me lose my mind 😂

Thanks

Hi Mathcodeprint I have installed your workbench but I can't figure out how to change the height and with of a plate. I can change the length but nothing else. Do you have any documentation for this? Thanks for all your great work.

Thank you

Different Combo View (Solver messages etc) in FreeCAD 0.21.2? I'm a beginner.

7:11 That is likely happening because you actually typed 6' 8"' , so it probably adds 6' and 8' and ignores the ", hence why you got 14' in the end.

I have tried to replicate this and my sketches are locked into position. can anybody help?

This video helped me a whole lot. Thank you so much

Great tutorial, but kinda nuts how complicated FreeCAD is. All this just for a bit of text on my 3D model.

Excellent. Thank you.

❤

You have great intentions, but your presentation is disjointed, confusing, and you explain AFTER you have done the task ...so sad. Please practice before teaching. ......Blind leading the blind.

So useful tnx a lot

Try lofting a tubular part. This requires sketches with two rectangles and one is inside the other. I was using loft to create a rectangular tube which varied in dimension along its length. It worked well except at one section where the inner rectangle and outer rectangle crossed over at one loft section of the loft which made an apex in that section of a solid I wanted to 3d print. I really puzzled for hours trying to eliminate it. Eventually i found the reason. Freecad dies not loft double shapes via inner and outer shapes but it lofts double enclosed sketches in the order you create them. 😂😂😂. Wow. This was not obvious to me.

Hi, How did you get this rafter into your BasicShed files?

$fn=90; module holder_positive(h, w, l) { // base translate([0, 0, 0]) cube([w, l, 2]); translate([0, 0, 0]) cube([2, l, 8]); translate([w - 2, 0, 0]) cube([2, l, 8]); // wall R/ translate([0, l, 0]) cube([w, 2, h]); translate([0, l + 2/2, h]) rotate([90, 0, 90]) cylinder(d=2, h=w); // wall L translate([0, 0, 0]) cube([w, 2, h]); translate([0, -2, h]) rotate([90, 0, 90]) cylinder(d = 19, w); } module holder_negative(h, w, l) { // base translate([w / 2, (l+2) / 2, 0]) cylinder(d=8, h=8); // wall L translate([0, -20, 0]) cube([w, 20, h + 19/2]); translate([0, -2, h]) rotate([90, 0, 90]) cylinder(d = 16, w); } module holder(h, w, l) { difference() { holder_positive(h, w, l); holder_negative(h, w, l); } } holder(40, 35, 15);

Great video. I absorb these bite sized videos much better.

.21.2 is the version I just downloaded and it looks nothing like what you have there. Are you still using .18 and .19? Should I download the old ones? or have you redone cylinders on up to date software somewhere else? I doubt it, this was the first result to my search.

Good video. What version of your kiCAD? My kiCAD can't show the 3D design of my pcb and component design. I use kiCAD version 8,can you tell me how to show the 3D?

Everything I print is directly converted to millimeters so I would say the units are millimeters and thats a nice thing to count on without having to scale

This is exactly what I wanted to learn how to do, thank you

GRRRR! When I start a new draft, to follow your directions, there's no "body" under "unnamed". Where did you create a "BODY"?

The author has never in his life designed reinforced concrete. Stop teaching people this non-sense. Since when is your shear reinforcing inside the main reinforcing? Do you even know what shear reinforcing is for?

very nice. you almost showed me what I needed. How to REPLACE a text with mirrored version. Very handy for making maker stamps for ceramics.

Thank you!

Hey, I was wondering what your initial setup settings were. I just downloaded the software, and the view/navigation isn't the same.

This is a great video, would you be interested in making a new video with the updated feeCad? Thanks!

Hi Sorry for the intrusion i am also a learner but have spot some irregularities with your approach or strategy the sketch tools are meant for specific tasks however you are deploying them without precision it is precise to use the curve surface work bench to attach sketch to a sphere or curved objects further to your current approach a sketch will not appear instantly unless it is placed directly on an object thus it keeps asking for reconfirmation when you do so. sincerely

Nice, I re-created it in build123d: from build123d import * with BuildPart() as p: with BuildLine() as l: m1 = Helix(8,12,10) with BuildSketch(m1^0) as s: Rectangle(8,3) sweep(is_frenet=True)